Lea-Der™ Drill Floor Traction Matting

A two component custom blend of polyol polyurethane with embedded traction surface to withstand invert and other fluids encountered during the drilling process.


  • Custom manufactured from custom blend industrial polyurethane
  • Available in any colour with identified danger zones
  • Aggressive aggregate embedded to create traction enhanced surface
  • Stainless steel studs embedded for added traction
  • Very durable and resistant to fluids
  • Channels in the surface allow for fluid run off & added traction
  • Worn surfaces can be repaired / restored / resurfaced
  • Approximately 8lbs per sq. ft.

Rotary Table Mats

  • 1.25”/31.75mm thick or as requested
  • Usually safety yellow with orange sloped edges
  • Company name, rig # and danger are embedded in a contrast colour

Rig Floor Mats

  • 1.25”/31.75mm or 0.75”/9.05mm thick or as requested
  • Yellow and Red are the typical colors
  • Can be attached to rig floors using conventional methods
  • Mats are manufactured to customer specifications/supplied drawings for ease of fit


Properties — Wet:

  • Solids: 100%
  • VOC: 0
  • Flash Point: 175ºC

Properties — Dry:

  • Tensile strength: 3000 PSI
  • Elongation: 231%
  • Hardness: 95 Shore A
  • Resurfacability: Excellent
  • Taber Abrasion: 4.4 mg Loss / 1000 cycles CS 17
  • Split Tear: 400 lb F/IN
  • Weatherability: 2500 Hours Passed
  • Water Absorption: Approx. Cold Temp. Rating: –70ºC
  • Dielectric Strength: (ASTM D149) 400Volts / Mil
  • Independent laboratory test performed UL94-HB test for flammability of plastic materials: PASS
  • UV Rating: STABLE

Click Here for warranty information.

Oil Rig Floor
Oil rig floor mat
Closeup of traction mats
Oilfield Rig floor mats
oilfield equipment
Rig worker